SPS 25A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole GBJ2510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


GBJ25005 - GBJ2510 25A GLASS PASSIVATED BRIDGE RECTIFIER

GBJ25005, GBJ2501, GBJ2502, GBJ2504, GBJ2506, GBJ2508, GBJ2510


Glass Passivated Die Construction

High Case Dielectric Strength of 2500VRMS

Low Reverse Leakage Current

Surge Overload Rating to 350A Peak

Ideal for Printed Circuit Board Applications

UL Listed Under Recognized Component Index

Lead Free Finish; RoHS Compliant 


Case: GBJ

Case Material: Molded Plastic. UL Flammability Classification 94V-0

Moisture Sensitivity: Level 1 per J-STD-020

Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208

Lead Free Plating (Tin Finish).

Polarity: Molded on Body

Mounting: Through Hole for #6 Screw

Mounting Torque: 5.0 in-lbs Maximum

Weight: 6.6 grams (Approximate)


GBJ bridge rectifier needs special attention in installation and work, because the correct installation and correct use of GBJ bridge rectifier determine the service life of GBJ bridge rectifier.


The distance between the lower edge of the GBJ bridge rectifier and the surface of the commutator or collector ring should be kept within 2-4 mm. If the distance is too small, GBJ will easily scratch the commutator or bridge; if it is too large. The GBJ bridge rectifier is easy to move and cause damage. Ensure that the GBJ bridge rectifier works within the surface of the commutator or GBJ, and not close to the edge of the GBJ. If the GBJ bridge rectifier is improperly installed in the cold state, the GBJ bridge rectifier may not completely touch the surface of the collector ring after the GBJ shaft expands in the hot state. Grind the arc surface of the GBJ bridge rectifier to make it basically consistent with the GBJ sub or bridge rectifier.


Due to the gap between the GBJ and the bridge rectifier, and due to the slight deformation of the fixed parts of the GBJ bridge rectifier under the action of stress, the radius of curvature of the GBJ bridge rectifier section will be slightly larger than that of the commutator or the GBJ bridge rectifier. During the operation of the bridge rectifier, not all the cross-sectional area of the GBJ bridge rectifier is in contact with the commutator or the collector ring, but only a part of the area. Therefore, the arc surface of the GBJ bridge rectifier must be ground to make it basically consistent with the commutator or GBJ bridge rectifier ring.

SPS-25A-1000V-Glass-Passivated-Single-Phase-Bridge-Rectifier-Through-Hole-GBJ2510

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole KBPC5010

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


KBPC5010 is a single-phase Bridge Rectifier with diffused junction and metal case.

Low Power Loss and High Efficiency

Electrically Isolated Metal Case for Maximum Heat Dissipation

Through Hole with #10 Screw Mounting

Case to Terminal Isolation Voltage of 2500V

Applications: Mains Rectification

Bridge Rectifier Diode, KBPC Series, Single Phase, 1 kV, 50 A, Module, 1.2 V, 4 Pins


Plated faston lugs or wire leads, add "W" suffix to indicate wire leads.

Silicon Bridge Rectifiers KBPC10005W Through KBPC5010W Series:

KBPC10005W, KBPC1001W, KBPC1002W, KBPC1004W, KBPC1006W, KBPC1008W, KBPC1010W

KBPC15005W, KBPC1501W, KBPC1502W, KBPC1504W, KBPC1506W, KBPC1508W, KBPC1510W

KBPC25005W, KBPC2501W, KBPC2502W, KBPC2504W, KBPC2506W, KBPC2508W, KBPC2525W

KBPC35005W, KBPC3501W, KBPC3502W, KBPC3504W, KBPC3506W, KBPC3508W, KBPC3510W

KBPC50005W, KBPC5001W, KBPC5002W, KBPC5004W, KBPC5006W, KBPC5008W, KBPC5010W

Reverse Voltage: 50V, 100V, 200V, 400V, 600V, 800V, 1000V

Forward Current: 10A, 15A, 25A, 35A, 50A


China National Securities Research Institute estimates that the global semiconductor market will grow by 8%/10% year-on-year in 2021/2022.


Demand for 5G mobile phones will continue to grow in 2021, and there are trends continuing to drive global and domestic semiconductor demand and reduce inventories. The growth of the semiconductor market in the past two years should continue to drive the valuation of international and domestic semiconductor companies.

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 4A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole GBU410

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


If there is a traditionally relatively quiet technology industry that makes headlines in 2020, it should be the semiconductor industry. From record-setting mergers and acquisitions to huge venture capital financings, and the decline of large companies, semiconductor companies suddenly found themselves as targets for venture capital, regulators, politicians, and Apple.


2020 is a bumper year, mainly because it is the peak year of the industry model we have been focusing on for many years.


According to data released by the World Semiconductor Trade Statistics Organization (WSTS), an industry group composed of major manufacturers, the semiconductor market will grow by 8.4% year-on-year in 2021, reaching US$469.4 billion, a record high. The popularity of 5G and the recovery of the automotive industry will bring benefits to the semiconductor market.


The epidemic has accelerated the technological changes to remote work and distance learning, and the demand for Industry 4.0 technologies such as big data, automation and the Internet of Things to establish a more flexible supply chain.


GBU410: Bridge Rectifier Single Phase Standard 1kV Through Hole GBU


Glass Passivated Die Construction

High Case Dielectric Strength of 1500VRMS

Low Reverse Leakage Current

Surge Overload Rating to 150A Peak

Ideal for Printed Circuit Board Applications

UL Listed Under Recognized Component Index


Case: GBU

Case Material: Molded Plastic. UL Flammability

Classification Rating 94V-0

Moisture Sensitivity: Level 1 per J-STD-020C

Terminals: Plated Leads. Solderable per MIL-STD-202, Method 208

Lead Free Plating (Tin Finish)

Polarity: Marked on Body

Mounting: Through Hole for #6 Screw

Weight: 6.6 grams (approximate)


Other popular 1000V Through Hole Glass Passivated Single Phase Bridge Rectifiers:

KBPC3510, 35A, 1000V, KBPC case

KBPC5010, 50A, 1000V, KBPC case

GBJ2510, 25A, 1000V, GBJ case

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 10A 800V Glass Passivated Single Phase Bridge Rectifier Through Hole GBU810

We hope the magic of Christmas fills every corner of your heart and home with joy — now and always. May your family have a holiday season that is full of wonderful surprises, treats and nonstop laughter. We know it's been a hard year 2020, hope the New Year brings better days.


In the new year, enjoy more benefits from SPS support. 


SPS 10A 800V Glass Passivated Single Phase Bridge Rectifier Through Hole GBU810 Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging

Brand: SPS--Chinese professional manufacturer

Current - DC Forward (If): 8A

MPN: GBU810

Diode Type: Single Phase

Package: GBU

Speed: Standard Recovery >500ns, > 200mA (Io)

Description: RECT BRIDGE GPP 1000V 8A GBU

Mounting Type: Through Hole

Supplier Device Package: GBU

Voltage - Peak Reverse (Max): 1000V


SPS can supply GBU810, email or call us to request GBU810 price and lead time. SPS is a professional electronic components factory. SPS is specializes in supplying 8A series plug-in bridge stacks, including: GBU8005, GBU801, GBU802, GBU804, GBU806, GBU808, GBU810.


MBS/MBF/MBM/ABS/DBS/DB BRIDGE RECTIFIERS Plug-in bridge can be supplied at very economical price too.


SPS is manufacturing electronic components, power modules, diodes, bridges, transistors in Shanghai, China, top leading manufacturer and Supplier of semiconductor devices in Global. 

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com 

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 35A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole KBPC3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 35A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole KBPC3510


The bridge rectifiers KBPC3510 and KBPC3510W, these two models, for customers who are familar with this type of square bridge, should know that KBPC3510 is a square bridge and its pins are flat feet, while KBPC3510W is a square bridge and it is of pin style. Why are there two packages for the same model? This is because customers need to use in different products, and different electronic products have different requirements for the bridge rectifier, so different designs have been made for these two models.


Category: Bridge Rectifier

Package: DIP

Basic parameters

Voltage: 1000V

Current: 35A

Withstand voltage: 1000V

Maximum current: 35A

Power characteristics: high power

Frequency characteristics: intermediate frequency

Package form: in-line type

Working temperature: 0~70 (℃)

Conductivity type: bipolar

Processing signal: digital signal

Static power consumption: 100 (mW)

Characteristic Symbol 

• KBPC35005: 50V 

• KBPC3501: 100V 

• KBPC3502: 200V 

• KBPC3504: 400V 

• KBPC3506: 600V 

• KBPC3508: 800V 

• KBPC3510: 1000V


Get Prices, Availability & Datasheets For KBPC3510 and Other Bridge Rectifier Diodes. Save Time & Money. Search Now. 


Buy Electronic components, IC, Module, Transistor at SPS. Factory Direct Price. Specializing in new diode & bridge rectifiers. 20 years of service. 


Large Selection of Discrete Semiconductor Products, Competitive Prices. Fast Shipping & Great Prices Available. 


Worldwide shipping, 100% tested before shipping, Best After-sale service. 

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 35A 1000V Glass Passivated Bridge Rectifiers Through Hole GBPC3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 35A 1000V Glass Passivated Bridge Rectifiers Through Hole GBPC3510


Product Overview:

GBPC3510 is a single phase bridge rectifier with push-on terminals. Integrally molded heatsink provided very low thermal resistance for maximum heat dissipation.

Surge overload rating from 300 to 400A

Isolated voltage from case to lead over 2500V

Silver terminal finish

1.5°C/W Junction to case thermal resistance

Applications: Mains Rectification


Product Information:

No. of Phases: Single Phase  

Repetitive Reverse Voltage Vrrm Max: 1kV  

Forward Current If(AV): 35A  

Bridge Rectifier Case Style: Module  

Forward Voltage VF Max: 1.1V  

No. of Pins: 4Pins  

Operating Temperature Max: 150°C  

Product Range: GBPC3 Series


Characteristic Symbol 

• GBJ35005: 50V 

• GBJ3501: 100V 

• GBJ3502: 200V 

• GBJ3504: 400V 

• GBJ3506: 600V 

• GBJ3508: 800V 

• GBJ3510: 1000V

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Glass Passivated Bridge Rectifiers Through Hole GBJ5010 in Induction Cooker

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 50A Glass Passivated Bridge Rectifiers Through Hole GBJ50005-GBJ5010


The bridge rectifier stack is generally used in full-wave rectification circuits, and it is divided into full bridge and half bridge. The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole. The exterior is packaged with insulating plastic, and the high-power bridge rectifier is encapsulated with a zinc metal shell outside the insulating layer to enhance the heat dissipation performance.


The bridge rectifier of the induction cooker is to rectify the household AC220V voltage, its withstand voltage value is generally above 1000V, and the current is about 20A.


The bridge rectifier of the induction cooker can replace the bridge rectifier of the power amplifier, but the bridge rectifier of the power amplifier must not replace the bridge rectifier of the induction cooker. The replacement will be burned and even the entire circuit will be destroyed.


The bridge rectifier of the induction cooker generates relatively high heat due to its high power. Generally speaking, the bridge rectifier of the induction cooker will be equipped with heat sinks to enhance its heat dissipation. The bridge rectifier of the general power amplifier does not need to install a radiator, and some high-power stage professional power amplifiers also use fans for heat dissipation and heat sinks!


The figure below shows a high-power bridge rectifier GBJ5010 for induction cooker. How to get its withstand voltage and rectified current according to this model? In fact, it is not difficult. Generally speaking, there are three numbers behind the bridge rectifier, and the first one represents its rectified current. Such as: KBL410 is 4A, 1000V.  GBJ5010 is 50A, 1000V. GBU1510, 15A/1000V.


The bridge rectifier is marked with two ~ wave symbols, which means that these two are AC voltage input terminals, and + and- indicate its positive and negative output terminals. AC is not divided into positive and negative, DC is divided into positive and negative.

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 10A 1000V Through Hole Glass Passivated Bridge Rectifiers GBJ1010 RoHS Reach

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc., manufacturing semiconductors since 2000, all products reach the quality requirements of RoHS, Reach, it's the reliable supplier and partner for your promissing business. 


After long-term development, we have established strategic partnerships with well-known customers in the fields of communication electronics, automotive electronics, Internet of Things, Internet of Vehicles, industrial control, home appliance control, new energy equipment, etc.; Principles to meet the different needs of customers; At the same time, it also provides customers with solutions such as supporting applications of electronic components.


SPS takes customer first, quality first, reasonable price, good service, creating a win-win situation, self-improvement and continuous development as the company's business philosophy and service tenet.


SPS 10A 1000V Through Hole Glass Passivated Bridge Rectifiers Single Phase Bridge GBJ1010


Package / Case: GBJ

Peak Reverse Voltage: 1000 V

Vr - Reverse Voltage: 700 V 

Vf - Forward Voltage: 1 V

Max Surge Current: 170 A

Operating Temperature Range: - 65 C + 150 C

Ir - Reverse Current: 5 uA


The complete serie of 10A 1000V GBJ: GBJ10005-50V, GBJ1001-100V,GBJ1002-200V,GBJ1004-400V,GBJ1006-600V,GBJ1008-800V,GBJ1010-1000V

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Square Single Phase Bridge Rectifiers BR5010

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


Bridge rectifier is also called rectifier bridge stack, is the most commonly used circuit that uses the unidirectional conductivity of diodes for rectification, and is often used to convert alternating current into direct current.


Most rectifier circuits are composed of transformers, rectifier main circuits and filters. It is widely used in the fields of DC motor speed regulation, generator excitation regulation, electrolysis, electroplating and other fields.


The main circuit is mostly composed of silicon diode rectifiers and thyristors. The filter is connected between the main circuit and the load to filter out AC components in the pulsating DC voltage. The setting of the transformer depends on the specific situation. The function of the transformer is to achieve the matching between the AC input voltage and the DC output voltage and the electrical isolation between the AC power grid and the rectifier circuit.


The function of the rectifier circuit is to convert the low-voltage alternating current output by the AC step-down circuit into a unidirectional pulsating direct current. This is the rectification process of the alternating current. The rectifier circuit is mainly composed of rectifier diodes.


The voltage after the rectifier circuit is no longer AC voltage, but a mixed voltage containing DC voltage and AC voltage. It is customarily called unidirectional pulsating DC voltage.


In the half-wave rectifier circuit, when the rectifier diode is cut off, the peak value of the AC voltage is all added to both ends of the diode. The same is true for the full-wave rectifier circuit. When one diode is turned on, the other diode is turned off and bears the full AC peak voltage. Therefore, for these two rectifier circuits, the rectifier diode of the circuit is required to have a higher ability to withstand reverse peak voltage.


50A 1000V Square Single Phase Bridge Rectifiers BR5010 is in the following photo as a good example.

Part Number: BR5010 

Type:  Single Phase Bridge Rectifiers 

Termination Style: Through Hole

Package / Case: BR-50

If - Forward Current: 50 A

Peak Reverse Voltage:  1000 V

Vr - Reverse Voltage: 700 V

Packaging: Bulk

SPS-50A-1000V-Square-Single-Phase-Bridge-Rectifiers-BR5010-Diode-and-Rectifier-Manufacturer-Since-2000

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 35A 1000V Square Single Phase Bridge Rectifiers BR3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


What is a single phase bridge rectifier circuit?


The single-phase bridge rectifier circuit is a bridge rectifier, also called a bridge rectifier stack, which is the most commonly used circuit for rectification using the unidirectional conductivity of a diode, and is commonly used to convert alternating current into direct current.


Half-wave rectification uses the unidirectional characteristic of diodes. When the input is a standard sine wave, the output obtains the positive half of the sine wave, and the negative half is lost.


The bridge rectifier uses four diodes to be connected in pairs. When the positive half of the input sine wave is turned on by two tubes, the positive output is obtained; when the negative half of the sine wave is input, the other two tubes are turned on. Because the two tubes are reversely connected, the output still gets the positive half of the sine wave.


The utilization efficiency of the input sine wave by the bridge rectifier is twice as high as that of the half-wave rectifier. Bridge rectification is the first step in the conversion of alternating current to direct current.


The bridge rectifier is made up of multiple diode rectifiers for bridge connection and externally packaged with insulating plastic. The high-power bridge rectifier is enclosed by a metal shell outside the insulating layer to enhance heat dissipation. Bridge rectifiers have many varieties, excellent performance, high rectification efficiency, and good stability. The maximum rectification current is from 0.5A to 50A, and the maximum reverse peak voltage is from 50V to 1000V. Such as 35A 1000V Square Single Phase Bridge Rectifiers BR3510 in the following photo. 

Part Number: BR3510 

Type:  Single Phase Bridge Rectifiers 

Termination Style: Through Hole

Package / Case: BR-35

If - Forward Current: 35 A

Peak Reverse Voltage:  1000 V

Vr - Reverse Voltage: 700 V

Packaging: Bulk

SPS-35A-1000V-Square-Single-Phase-Bridge-Rectifiers-BR3510-Diode-and-Rectifier-Manufacturer-Since-2000

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

分页:[«]1[»]