SPS 35A 1000V Glass Passivated Bridge Rectifiers Through Hole GBPC3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 35A 1000V Glass Passivated Bridge Rectifiers Through Hole GBPC3510


Product Overview:

GBPC3510 is a single phase bridge rectifier with push-on terminals. Integrally molded heatsink provided very low thermal resistance for maximum heat dissipation.

Surge overload rating from 300 to 400A

Isolated voltage from case to lead over 2500V

Silver terminal finish

1.5°C/W Junction to case thermal resistance

Applications: Mains Rectification


Product Information:

No. of Phases: Single Phase  

Repetitive Reverse Voltage Vrrm Max: 1kV  

Forward Current If(AV): 35A  

Bridge Rectifier Case Style: Module  

Forward Voltage VF Max: 1.1V  

No. of Pins: 4Pins  

Operating Temperature Max: 150°C  

Product Range: GBPC3 Series


Characteristic Symbol 

• GBJ35005: 50V 

• GBJ3501: 100V 

• GBJ3502: 200V 

• GBJ3504: 400V 

• GBJ3506: 600V 

• GBJ3508: 800V 

• GBJ3510: 1000V

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Glass Passivated Bridge Rectifiers Through Hole GBJ5010 in Induction Cooker

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 50A Glass Passivated Bridge Rectifiers Through Hole GBJ50005-GBJ5010


The bridge rectifier stack is generally used in full-wave rectification circuits, and it is divided into full bridge and half bridge. The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole. The exterior is packaged with insulating plastic, and the high-power bridge rectifier is encapsulated with a zinc metal shell outside the insulating layer to enhance the heat dissipation performance.


The bridge rectifier of the induction cooker is to rectify the household AC220V voltage, its withstand voltage value is generally above 1000V, and the current is about 20A.


The bridge rectifier of the induction cooker can replace the bridge rectifier of the power amplifier, but the bridge rectifier of the power amplifier must not replace the bridge rectifier of the induction cooker. The replacement will be burned and even the entire circuit will be destroyed.


The bridge rectifier of the induction cooker generates relatively high heat due to its high power. Generally speaking, the bridge rectifier of the induction cooker will be equipped with heat sinks to enhance its heat dissipation. The bridge rectifier of the general power amplifier does not need to install a radiator, and some high-power stage professional power amplifiers also use fans for heat dissipation and heat sinks!


The figure below shows a high-power bridge rectifier GBJ5010 for induction cooker. How to get its withstand voltage and rectified current according to this model? In fact, it is not difficult. Generally speaking, there are three numbers behind the bridge rectifier, and the first one represents its rectified current. Such as: KBL410 is 4A, 1000V.  GBJ5010 is 50A, 1000V. GBU1510, 15A/1000V.


The bridge rectifier is marked with two ~ wave symbols, which means that these two are AC voltage input terminals, and + and- indicate its positive and negative output terminals. AC is not divided into positive and negative, DC is divided into positive and negative.

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 10A 1000V Through Hole Glass Passivated Bridge Rectifiers GBJ1010 RoHS Reach

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc., manufacturing semiconductors since 2000, all products reach the quality requirements of RoHS, Reach, it's the reliable supplier and partner for your promissing business. 


After long-term development, we have established strategic partnerships with well-known customers in the fields of communication electronics, automotive electronics, Internet of Things, Internet of Vehicles, industrial control, home appliance control, new energy equipment, etc.; Principles to meet the different needs of customers; At the same time, it also provides customers with solutions such as supporting applications of electronic components.


SPS takes customer first, quality first, reasonable price, good service, creating a win-win situation, self-improvement and continuous development as the company's business philosophy and service tenet.


SPS 10A 1000V Through Hole Glass Passivated Bridge Rectifiers Single Phase Bridge GBJ1010


Package / Case: GBJ

Peak Reverse Voltage: 1000 V

Vr - Reverse Voltage: 700 V 

Vf - Forward Voltage: 1 V

Max Surge Current: 170 A

Operating Temperature Range: - 65 C + 150 C

Ir - Reverse Current: 5 uA


The complete serie of 10A 1000V GBJ: GBJ10005-50V, GBJ1001-100V,GBJ1002-200V,GBJ1004-400V,GBJ1006-600V,GBJ1008-800V,GBJ1010-1000V

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Square Single Phase Bridge Rectifiers BR5010

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


Bridge rectifier is also called rectifier bridge stack, is the most commonly used circuit that uses the unidirectional conductivity of diodes for rectification, and is often used to convert alternating current into direct current.


Most rectifier circuits are composed of transformers, rectifier main circuits and filters. It is widely used in the fields of DC motor speed regulation, generator excitation regulation, electrolysis, electroplating and other fields.


The main circuit is mostly composed of silicon diode rectifiers and thyristors. The filter is connected between the main circuit and the load to filter out AC components in the pulsating DC voltage. The setting of the transformer depends on the specific situation. The function of the transformer is to achieve the matching between the AC input voltage and the DC output voltage and the electrical isolation between the AC power grid and the rectifier circuit.


The function of the rectifier circuit is to convert the low-voltage alternating current output by the AC step-down circuit into a unidirectional pulsating direct current. This is the rectification process of the alternating current. The rectifier circuit is mainly composed of rectifier diodes.


The voltage after the rectifier circuit is no longer AC voltage, but a mixed voltage containing DC voltage and AC voltage. It is customarily called unidirectional pulsating DC voltage.


In the half-wave rectifier circuit, when the rectifier diode is cut off, the peak value of the AC voltage is all added to both ends of the diode. The same is true for the full-wave rectifier circuit. When one diode is turned on, the other diode is turned off and bears the full AC peak voltage. Therefore, for these two rectifier circuits, the rectifier diode of the circuit is required to have a higher ability to withstand reverse peak voltage.


50A 1000V Square Single Phase Bridge Rectifiers BR5010 is in the following photo as a good example.

Part Number: BR5010 

Type:  Single Phase Bridge Rectifiers 

Termination Style: Through Hole

Package / Case: BR-50

If - Forward Current: 50 A

Peak Reverse Voltage:  1000 V

Vr - Reverse Voltage: 700 V

Packaging: Bulk

SPS-50A-1000V-Square-Single-Phase-Bridge-Rectifiers-BR5010-Diode-and-Rectifier-Manufacturer-Since-2000

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 35A 1000V Square Single Phase Bridge Rectifiers BR3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


What is a single phase bridge rectifier circuit?


The single-phase bridge rectifier circuit is a bridge rectifier, also called a bridge rectifier stack, which is the most commonly used circuit for rectification using the unidirectional conductivity of a diode, and is commonly used to convert alternating current into direct current.


Half-wave rectification uses the unidirectional characteristic of diodes. When the input is a standard sine wave, the output obtains the positive half of the sine wave, and the negative half is lost.


The bridge rectifier uses four diodes to be connected in pairs. When the positive half of the input sine wave is turned on by two tubes, the positive output is obtained; when the negative half of the sine wave is input, the other two tubes are turned on. Because the two tubes are reversely connected, the output still gets the positive half of the sine wave.


The utilization efficiency of the input sine wave by the bridge rectifier is twice as high as that of the half-wave rectifier. Bridge rectification is the first step in the conversion of alternating current to direct current.


The bridge rectifier is made up of multiple diode rectifiers for bridge connection and externally packaged with insulating plastic. The high-power bridge rectifier is enclosed by a metal shell outside the insulating layer to enhance heat dissipation. Bridge rectifiers have many varieties, excellent performance, high rectification efficiency, and good stability. The maximum rectification current is from 0.5A to 50A, and the maximum reverse peak voltage is from 50V to 1000V. Such as 35A 1000V Square Single Phase Bridge Rectifiers BR3510 in the following photo. 

Part Number: BR3510 

Type:  Single Phase Bridge Rectifiers 

Termination Style: Through Hole

Package / Case: BR-35

If - Forward Current: 35 A

Peak Reverse Voltage:  1000 V

Vr - Reverse Voltage: 700 V

Packaging: Bulk

SPS-35A-1000V-Square-Single-Phase-Bridge-Rectifiers-BR3510-Diode-and-Rectifier-Manufacturer-Since-2000

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 1000V Bridge Rectifiers KBPC5010 Working Principle

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


KBPC5010 is 50A, 1000V (1, 2, 3, 4, 5, 6, 7 or 005, 01, 02, 04, 06, 08, 10 respectively represent the voltage range of 50V, 100V, 200V, 400V, 600V, 800V, 1000V).


The working principle and application of bridge rectifier KBPC5010:


The purpose of bridge rectifier KBPC5010 is to convert alternating current into direct current. What is the working principle of the bridge rectifier in the circuit?


The rectification in the bridge rectifier is a term. It completes its work through the principle of unidirectional conduction of the diode. To put it simply, the diode is unidirectional, which is forward conduction and reverse cutoff. In other words, the diode only allows its positive pole to enter positive electricity and its negative pole to enter negative electricity. The diode only allows current to pass in one direction, so when it is connected to an AC circuit, it can make the current in the circuit flow only in one direction, the so-called "rectification". Among them, two diodes are half-wave bridge rectifiers, and four are full-wave bridge rectifiers.


1. Rectifier circuit: use a bridge rectifier with unidirectional conductivity, which can also be called a bridge rectifier stack. Convert the 50HZ alternating current in the circuit whose direction and size are changed into direct current with the same direction but still pulsating in size.


2. Filter circuit: Utilizing the nature of the energy storage element that the voltage at both ends of the capacitor C cannot change suddenly, connecting the capacitor C in parallel with the load RL of the rectifier circuit can filter out most of the AC components in the output of the rectifier circuit, thereby obtaining a relatively smooth Direct current. In low-power rectifier circuits, capacitor filtering is often used.


3. Power transformer: transform the AC voltage of the grid into an AC voltage that meets the requirements, and the AC voltage can be rectified to obtain the DC voltage required by the electronic equipment.


4. Voltage stabilizer circuit: When the grid voltage or load current changes, the amplitude of the DC voltage output by the filter circuit will also change accordingly. Therefore, the function of the stabilizer circuit is to stabilize the DC voltage after rectification and filtering. In the low-power DC power supply, several common rectifier bridge circuits are single-phase half-wave, full-wave, bridge and three-phase, among which there are both AC and DC.


By using a secondary winding of the transformer and the rectifier bridge, the load of the rectifier circuit can have pulsating DC voltage and current in the same direction within the positive and negative half cycles of the AC power supply.

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS Semiconductor Manufacturer Reviews Show on FIEE Eletrica 2017 Brazil

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


Looking back on the past successful exhibition experience. SPS is planning to again exhibit at FIEE Eletrica in Sao Paulo, from Tuesday, 20th July to Friday, 23th July 2021.


The largest electricity market in Latin America-Brazil


Brazil is the largest economy in Latin America. The rapid economic development has led to an increase in power demand. The power industry is favored by many investment institutions.


The Brazilian government has decided to open the electricity market and establish an independent power regulation agency, so that the Brazilian power industry will form an environment of free competition. In the future, the government will no longer invest in the construction of new power companies, and will encourage private companies to invest; electricity is sold freely, and electricity prices are adjusted by the market to attract more private investors to invest in the power industry.


Reasons to participate in FIEE:

1. Due to the economic recovery in Brazil, GTD and the power industry will continue to invest in high-tech and high-tech solutions.

2. Electricity in Brazil is an industry that quickly attracted global attention.

3. The center has a trade volume of 20 billion U.S. dollars.

4. A rare opportunity for your company to display its image, expand its market share, and enjoy the huge business opportunities brought about by the economic recovery.

5. Advanced power electronics technology, show breakthroughs in advanced automation technology, understand your own emergency plans, and prevent future energy shortages.


SPS always introduce the strongest series to customers: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010


GBU and GBJ are two package types of bridge rectifiers, and the parameters are different. This depends mainly on how customers select and design the circuit board.


Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS Semiconductor Bridge Rectifier Manufacturer Exhibition Munich Electronica

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS Semiconductor Bridge Rectifier Manufacturer Exhibition Munich Electronica 


Munich Electronica covers integrated circuits, electronic components, and production equipment, fully displaying the key links of the electronic industry chain.


SPS, as a chinese manufacturer of Bridge Rectifier, Diode Rectifier, Transistor, attends Munich Electronica each 2 years, let's expect next meeting in 2021 in Munich Germany.


The Bridge Rectifier stack is generally used in full-wave rectifier circuits, and it is divided into full bridge and half bridge.

The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole.

The forward current of the full bridge has various specifications such as 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 5A, 10A, 20A, 35A, 50A, etc. The withstand voltage (the highest reverse voltage) is 25V, 50V, 100V, 200V, 300V, 400V, 500V, 600V, 800V, 1000V and other specifications.

When choosing a bridge rectifier, mainly need consider the rectifier circuit and operating voltage.


There are four types of bridge rectifier packages: Square bridge, Flat bridge, Round bridge, and Patch MINI bridge.

Square bridges are mainly packaged with BR3, BR6, BR8, GBPC, KBPC, KBPC-W, GBPC-W, MT-35 (three-phase bridge). SPS popular bridges GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

The main packages of Flat bridges are KBP, KBL, KBU, KBJ, GBU, GBJ, D3K. SPS popular bridges GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010

Round bridge is mainly packaged with WOB, WOM, RB-1.

SMD MINI bridge is mainly packaged with BDS, MBS, MBF, ABS.

SPS-Semiconductor-Bridge-Rectifier-Manufacturer-Exhibition-Munich-Electronica

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS Semiconductor Diode Bridge Rectifier Manufacturer Reviews Show on 2018 Munich Electronica in Ger

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS Semiconductor Diode Bridge Rectifier Manufacturer Reviews Show on 2018 Munich Electronica in Germany


2020 Munich Electronica had been cancelled, let's review the 2018 Munich Electronica in Germany,  SPS exhibits the strongest bridge rectifiers to customers from Europe, America, Asia etc.:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006


Contact us to get the competitive offer and enjoy the most of profit: 


4.0 AMPS GBU4005, GBU401, GBU402, GBU404, GBU406, GBU408, GBU410 Glass Passivated Bridge Rectifiers

6.0 AMPS GBU6005, GBU601, GBU602, GBU604, GBU606, GBU608, GBU610 Glass Passivated Bridge Rectifiers 

8.0 AMPS GBU8005, GBU801, GBU802, GBU804, GBU806, GBU808, GBU810 Glass Passivated Bridge Rectifiers

10.0 AMPS GBU10005, GBU1001, GBU1002, GBU1004, GBU1006, GBU1008, GBU1010 Glass Passivated Bridge Rectifiers  


10.0 AMPS GBJ10005, GBJ1001, GBJ1002, GBJ1004, GBJ1006, GBJ1008, GBJ1010 Glass Passivated Bridge Rectifiers 

25.0 AMPS GBJ25005, GBJ2501, GBJ2502, GBJ2504, GBJ2506, GBJ2508, GBJ2510 Glass Passivated Bridge Rectifiers

50.0 AMPS GBJ50005, GBJ5001, GBJ5002, GBJ5004, GBJ5006, GBJ5008, GBJ5010 Glass Passivated Bridge Rectifiers 


35.0 AMPS GBPC35005, GBPC3501, GBPC3502, GBPC3504, GBPC3506, GBPC3508, GBPC3510 Bridge Rectifiers

50.0 AMPS GBPC50005, GBPC5001, GBPC5002, GBPC5004, GBPC5006, GBPC5008, GBPC5010 Bridge Rectifiers


35.0 AMPS KBPC35005, KBPC3501, KBPC3502, KBPC3504, KBPC3506, KBPC3508, KBPC3510 Bridge Rectifiers

50.0 AMPS KBPC50005, KBPC5001, KBPC5002, KBPC5004, KBPC5006, KBPC5008, KBPC5010 Bridge Rectifiers 


35.0 AMPS BR35005, BR3501, BR3502, BR3504, BR3506, BR3508, BR3510 Bridge Rectifiers 

50.0 AMPS BR50005, BR5001, BR5002, BR5004, BR5006, BR5008, BR5010 Bridge Rectifiers 


Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

分页:[«]1[»]