SPS 25A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole GBJ2510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


GBJ25005 - GBJ2510 25A GLASS PASSIVATED BRIDGE RECTIFIER

GBJ25005, GBJ2501, GBJ2502, GBJ2504, GBJ2506, GBJ2508, GBJ2510


Glass Passivated Die Construction

High Case Dielectric Strength of 2500VRMS

Low Reverse Leakage Current

Surge Overload Rating to 350A Peak

Ideal for Printed Circuit Board Applications

UL Listed Under Recognized Component Index

Lead Free Finish; RoHS Compliant 


Case: GBJ

Case Material: Molded Plastic. UL Flammability Classification 94V-0

Moisture Sensitivity: Level 1 per J-STD-020

Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208

Lead Free Plating (Tin Finish).

Polarity: Molded on Body

Mounting: Through Hole for #6 Screw

Mounting Torque: 5.0 in-lbs Maximum

Weight: 6.6 grams (Approximate)


GBJ bridge rectifier needs special attention in installation and work, because the correct installation and correct use of GBJ bridge rectifier determine the service life of GBJ bridge rectifier.


The distance between the lower edge of the GBJ bridge rectifier and the surface of the commutator or collector ring should be kept within 2-4 mm. If the distance is too small, GBJ will easily scratch the commutator or bridge; if it is too large. The GBJ bridge rectifier is easy to move and cause damage. Ensure that the GBJ bridge rectifier works within the surface of the commutator or GBJ, and not close to the edge of the GBJ. If the GBJ bridge rectifier is improperly installed in the cold state, the GBJ bridge rectifier may not completely touch the surface of the collector ring after the GBJ shaft expands in the hot state. Grind the arc surface of the GBJ bridge rectifier to make it basically consistent with the GBJ sub or bridge rectifier.


Due to the gap between the GBJ and the bridge rectifier, and due to the slight deformation of the fixed parts of the GBJ bridge rectifier under the action of stress, the radius of curvature of the GBJ bridge rectifier section will be slightly larger than that of the commutator or the GBJ bridge rectifier. During the operation of the bridge rectifier, not all the cross-sectional area of the GBJ bridge rectifier is in contact with the commutator or the collector ring, but only a part of the area. Therefore, the arc surface of the GBJ bridge rectifier must be ground to make it basically consistent with the commutator or GBJ bridge rectifier ring.

SPS-25A-1000V-Glass-Passivated-Single-Phase-Bridge-Rectifier-Through-Hole-GBJ2510

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 4A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole GBU410

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


If there is a traditionally relatively quiet technology industry that makes headlines in 2020, it should be the semiconductor industry. From record-setting mergers and acquisitions to huge venture capital financings, and the decline of large companies, semiconductor companies suddenly found themselves as targets for venture capital, regulators, politicians, and Apple.


2020 is a bumper year, mainly because it is the peak year of the industry model we have been focusing on for many years.


According to data released by the World Semiconductor Trade Statistics Organization (WSTS), an industry group composed of major manufacturers, the semiconductor market will grow by 8.4% year-on-year in 2021, reaching US$469.4 billion, a record high. The popularity of 5G and the recovery of the automotive industry will bring benefits to the semiconductor market.


The epidemic has accelerated the technological changes to remote work and distance learning, and the demand for Industry 4.0 technologies such as big data, automation and the Internet of Things to establish a more flexible supply chain.


GBU410: Bridge Rectifier Single Phase Standard 1kV Through Hole GBU


Glass Passivated Die Construction

High Case Dielectric Strength of 1500VRMS

Low Reverse Leakage Current

Surge Overload Rating to 150A Peak

Ideal for Printed Circuit Board Applications

UL Listed Under Recognized Component Index


Case: GBU

Case Material: Molded Plastic. UL Flammability

Classification Rating 94V-0

Moisture Sensitivity: Level 1 per J-STD-020C

Terminals: Plated Leads. Solderable per MIL-STD-202, Method 208

Lead Free Plating (Tin Finish)

Polarity: Marked on Body

Mounting: Through Hole for #6 Screw

Weight: 6.6 grams (approximate)


Other popular 1000V Through Hole Glass Passivated Single Phase Bridge Rectifiers:

KBPC3510, 35A, 1000V, KBPC case

KBPC5010, 50A, 1000V, KBPC case

GBJ2510, 25A, 1000V, GBJ case

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 10A 600V Glass Passivated Single Phase Bridge Rectifier Through Hole GBU610

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


Thank you for your support, may this new year be a full of great accomplishments. Our whole team wishes you a lot of joy and happiness during this holiday season. May the upcoming year will be full of new achievements that will bring you a huge success. Happy New Year!


GBU610 series bridge rectifier, GBU610, GBU608, GBU606, GBU604, GBU602, GBU601, GBU6005.


Voltage Range 50 to 1000 Volts, Current 6.0 Amperes, 6.0 AMPS Bridge Rectifier, GBU Package.


Glass Passivated Die Construction

High Case Dielectric Strength of 1500 VRMS

Low Reverse Leakage Current

Surge Overload Rating to 175A Peak

Ideal for Printed Circuit Board Applications

UL Listed Under Recognized Component

Index, File Number E94661

Lead Free Finish, RoHS Compliant


Case: GBU

Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0

Terminals: Plated Leads. Solderable per MIL-STD-202, Method 208

Lead Free Plating (Tin Finish)

Polarity: Marked on Body

Mounting: Through Hole for #6 Screw

Mounting Torque: 5.0 Inch-pounds Maximum

Weight: 6.6 grams (approximate)


GBU610-1000V, 6A

GBU608-800V, 6A

GBU606-600V, 6A

GBU604-400V, 6A

GBU602--200V, 6A

GBU601--100V, 6A

GBU6005--50V, 6A


Applications: Switching power supply, LED lights, integrated circuit, mobile communications, computers, industrial automation control equipment, automotive, monitor, TV, printer, adapter...


SPS also manufactures the other high quality bridge reactor series KBP KBU KBPC KBJ GBU GBJ....

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

分页:[«]1[»]