SPS 35A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole KBPC3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 35A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole KBPC3510


The bridge rectifiers KBPC3510 and KBPC3510W, these two models, for customers who are familar with this type of square bridge, should know that KBPC3510 is a square bridge and its pins are flat feet, while KBPC3510W is a square bridge and it is of pin style. Why are there two packages for the same model? This is because customers need to use in different products, and different electronic products have different requirements for the bridge rectifier, so different designs have been made for these two models.


Category: Bridge Rectifier

Package: DIP

Basic parameters

Voltage: 1000V

Current: 35A

Withstand voltage: 1000V

Maximum current: 35A

Power characteristics: high power

Frequency characteristics: intermediate frequency

Package form: in-line type

Working temperature: 0~70 (℃)

Conductivity type: bipolar

Processing signal: digital signal

Static power consumption: 100 (mW)

Characteristic Symbol 

• KBPC35005: 50V 

• KBPC3501: 100V 

• KBPC3502: 200V 

• KBPC3504: 400V 

• KBPC3506: 600V 

• KBPC3508: 800V 

• KBPC3510: 1000V


Get Prices, Availability & Datasheets For KBPC3510 and Other Bridge Rectifier Diodes. Save Time & Money. Search Now. 


Buy Electronic components, IC, Module, Transistor at SPS. Factory Direct Price. Specializing in new diode & bridge rectifiers. 20 years of service. 


Large Selection of Discrete Semiconductor Products, Competitive Prices. Fast Shipping & Great Prices Available. 


Worldwide shipping, 100% tested before shipping, Best After-sale service. 

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 35A 1000V Glass Passivated Bridge Rectifiers Through Hole GBPC3510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 35A 1000V Glass Passivated Bridge Rectifiers Through Hole GBPC3510


Product Overview:

GBPC3510 is a single phase bridge rectifier with push-on terminals. Integrally molded heatsink provided very low thermal resistance for maximum heat dissipation.

Surge overload rating from 300 to 400A

Isolated voltage from case to lead over 2500V

Silver terminal finish

1.5°C/W Junction to case thermal resistance

Applications: Mains Rectification


Product Information:

No. of Phases: Single Phase  

Repetitive Reverse Voltage Vrrm Max: 1kV  

Forward Current If(AV): 35A  

Bridge Rectifier Case Style: Module  

Forward Voltage VF Max: 1.1V  

No. of Pins: 4Pins  

Operating Temperature Max: 150°C  

Product Range: GBPC3 Series


Characteristic Symbol 

• GBJ35005: 50V 

• GBJ3501: 100V 

• GBJ3502: 200V 

• GBJ3504: 400V 

• GBJ3506: 600V 

• GBJ3508: 800V 

• GBJ3510: 1000V

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Glass Passivated Bridge Rectifiers Through Hole GBJ5010 in Induction Cooker

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 50A Glass Passivated Bridge Rectifiers Through Hole GBJ50005-GBJ5010


The bridge rectifier stack is generally used in full-wave rectification circuits, and it is divided into full bridge and half bridge. The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole. The exterior is packaged with insulating plastic, and the high-power bridge rectifier is encapsulated with a zinc metal shell outside the insulating layer to enhance the heat dissipation performance.


The bridge rectifier of the induction cooker is to rectify the household AC220V voltage, its withstand voltage value is generally above 1000V, and the current is about 20A.


The bridge rectifier of the induction cooker can replace the bridge rectifier of the power amplifier, but the bridge rectifier of the power amplifier must not replace the bridge rectifier of the induction cooker. The replacement will be burned and even the entire circuit will be destroyed.


The bridge rectifier of the induction cooker generates relatively high heat due to its high power. Generally speaking, the bridge rectifier of the induction cooker will be equipped with heat sinks to enhance its heat dissipation. The bridge rectifier of the general power amplifier does not need to install a radiator, and some high-power stage professional power amplifiers also use fans for heat dissipation and heat sinks!


The figure below shows a high-power bridge rectifier GBJ5010 for induction cooker. How to get its withstand voltage and rectified current according to this model? In fact, it is not difficult. Generally speaking, there are three numbers behind the bridge rectifier, and the first one represents its rectified current. Such as: KBL410 is 4A, 1000V.  GBJ5010 is 50A, 1000V. GBU1510, 15A/1000V.


The bridge rectifier is marked with two ~ wave symbols, which means that these two are AC voltage input terminals, and + and- indicate its positive and negative output terminals. AC is not divided into positive and negative, DC is divided into positive and negative.

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

分页:[«]1[»]