SPS 50A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole KBPC5010

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


KBPC5010 is a single-phase Bridge Rectifier with diffused junction and metal case.

Low Power Loss and High Efficiency

Electrically Isolated Metal Case for Maximum Heat Dissipation

Through Hole with #10 Screw Mounting

Case to Terminal Isolation Voltage of 2500V

Applications: Mains Rectification

Bridge Rectifier Diode, KBPC Series, Single Phase, 1 kV, 50 A, Module, 1.2 V, 4 Pins


Plated faston lugs or wire leads, add "W" suffix to indicate wire leads.

Silicon Bridge Rectifiers KBPC10005W Through KBPC5010W Series:

KBPC10005W, KBPC1001W, KBPC1002W, KBPC1004W, KBPC1006W, KBPC1008W, KBPC1010W

KBPC15005W, KBPC1501W, KBPC1502W, KBPC1504W, KBPC1506W, KBPC1508W, KBPC1510W

KBPC25005W, KBPC2501W, KBPC2502W, KBPC2504W, KBPC2506W, KBPC2508W, KBPC2525W

KBPC35005W, KBPC3501W, KBPC3502W, KBPC3504W, KBPC3506W, KBPC3508W, KBPC3510W

KBPC50005W, KBPC5001W, KBPC5002W, KBPC5004W, KBPC5006W, KBPC5008W, KBPC5010W

Reverse Voltage: 50V, 100V, 200V, 400V, 600V, 800V, 1000V

Forward Current: 10A, 15A, 25A, 35A, 50A


China National Securities Research Institute estimates that the global semiconductor market will grow by 8%/10% year-on-year in 2021/2022.


Demand for 5G mobile phones will continue to grow in 2021, and there are trends continuing to drive global and domestic semiconductor demand and reduce inventories. The growth of the semiconductor market in the past two years should continue to drive the valuation of international and domestic semiconductor companies.

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Glass Passivated Bridge Rectifiers Through Hole GBJ5010 in Induction Cooker

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 50A Glass Passivated Bridge Rectifiers Through Hole GBJ50005-GBJ5010


The bridge rectifier stack is generally used in full-wave rectification circuits, and it is divided into full bridge and half bridge. The full bridge is composed of 4 diode rectifiers connected in the form of a bridge full-wave rectifier circuit and packaged as a whole. The exterior is packaged with insulating plastic, and the high-power bridge rectifier is encapsulated with a zinc metal shell outside the insulating layer to enhance the heat dissipation performance.


The bridge rectifier of the induction cooker is to rectify the household AC220V voltage, its withstand voltage value is generally above 1000V, and the current is about 20A.


The bridge rectifier of the induction cooker can replace the bridge rectifier of the power amplifier, but the bridge rectifier of the power amplifier must not replace the bridge rectifier of the induction cooker. The replacement will be burned and even the entire circuit will be destroyed.


The bridge rectifier of the induction cooker generates relatively high heat due to its high power. Generally speaking, the bridge rectifier of the induction cooker will be equipped with heat sinks to enhance its heat dissipation. The bridge rectifier of the general power amplifier does not need to install a radiator, and some high-power stage professional power amplifiers also use fans for heat dissipation and heat sinks!


The figure below shows a high-power bridge rectifier GBJ5010 for induction cooker. How to get its withstand voltage and rectified current according to this model? In fact, it is not difficult. Generally speaking, there are three numbers behind the bridge rectifier, and the first one represents its rectified current. Such as: KBL410 is 4A, 1000V.  GBJ5010 is 50A, 1000V. GBU1510, 15A/1000V.


The bridge rectifier is marked with two ~ wave symbols, which means that these two are AC voltage input terminals, and + and- indicate its positive and negative output terminals. AC is not divided into positive and negative, DC is divided into positive and negative.

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 1000V Square Single Phase Bridge Rectifiers BR5010

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


Bridge rectifier is also called rectifier bridge stack, is the most commonly used circuit that uses the unidirectional conductivity of diodes for rectification, and is often used to convert alternating current into direct current.


Most rectifier circuits are composed of transformers, rectifier main circuits and filters. It is widely used in the fields of DC motor speed regulation, generator excitation regulation, electrolysis, electroplating and other fields.


The main circuit is mostly composed of silicon diode rectifiers and thyristors. The filter is connected between the main circuit and the load to filter out AC components in the pulsating DC voltage. The setting of the transformer depends on the specific situation. The function of the transformer is to achieve the matching between the AC input voltage and the DC output voltage and the electrical isolation between the AC power grid and the rectifier circuit.


The function of the rectifier circuit is to convert the low-voltage alternating current output by the AC step-down circuit into a unidirectional pulsating direct current. This is the rectification process of the alternating current. The rectifier circuit is mainly composed of rectifier diodes.


The voltage after the rectifier circuit is no longer AC voltage, but a mixed voltage containing DC voltage and AC voltage. It is customarily called unidirectional pulsating DC voltage.


In the half-wave rectifier circuit, when the rectifier diode is cut off, the peak value of the AC voltage is all added to both ends of the diode. The same is true for the full-wave rectifier circuit. When one diode is turned on, the other diode is turned off and bears the full AC peak voltage. Therefore, for these two rectifier circuits, the rectifier diode of the circuit is required to have a higher ability to withstand reverse peak voltage.


50A 1000V Square Single Phase Bridge Rectifiers BR5010 is in the following photo as a good example.

Part Number: BR5010 

Type:  Single Phase Bridge Rectifiers 

Termination Style: Through Hole

Package / Case: BR-50

If - Forward Current: 50 A

Peak Reverse Voltage:  1000 V

Vr - Reverse Voltage: 700 V

Packaging: Bulk

SPS-50A-1000V-Square-Single-Phase-Bridge-Rectifiers-BR5010-Diode-and-Rectifier-Manufacturer-Since-2000

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 1000V Bridge Rectifiers KBPC5010 Working Principle

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


KBPC5010 is 50A, 1000V (1, 2, 3, 4, 5, 6, 7 or 005, 01, 02, 04, 06, 08, 10 respectively represent the voltage range of 50V, 100V, 200V, 400V, 600V, 800V, 1000V).


The working principle and application of bridge rectifier KBPC5010:


The purpose of bridge rectifier KBPC5010 is to convert alternating current into direct current. What is the working principle of the bridge rectifier in the circuit?


The rectification in the bridge rectifier is a term. It completes its work through the principle of unidirectional conduction of the diode. To put it simply, the diode is unidirectional, which is forward conduction and reverse cutoff. In other words, the diode only allows its positive pole to enter positive electricity and its negative pole to enter negative electricity. The diode only allows current to pass in one direction, so when it is connected to an AC circuit, it can make the current in the circuit flow only in one direction, the so-called "rectification". Among them, two diodes are half-wave bridge rectifiers, and four are full-wave bridge rectifiers.


1. Rectifier circuit: use a bridge rectifier with unidirectional conductivity, which can also be called a bridge rectifier stack. Convert the 50HZ alternating current in the circuit whose direction and size are changed into direct current with the same direction but still pulsating in size.


2. Filter circuit: Utilizing the nature of the energy storage element that the voltage at both ends of the capacitor C cannot change suddenly, connecting the capacitor C in parallel with the load RL of the rectifier circuit can filter out most of the AC components in the output of the rectifier circuit, thereby obtaining a relatively smooth Direct current. In low-power rectifier circuits, capacitor filtering is often used.


3. Power transformer: transform the AC voltage of the grid into an AC voltage that meets the requirements, and the AC voltage can be rectified to obtain the DC voltage required by the electronic equipment.


4. Voltage stabilizer circuit: When the grid voltage or load current changes, the amplitude of the DC voltage output by the filter circuit will also change accordingly. Therefore, the function of the stabilizer circuit is to stabilize the DC voltage after rectification and filtering. In the low-power DC power supply, several common rectifier bridge circuits are single-phase half-wave, full-wave, bridge and three-phase, among which there are both AC and DC.


By using a secondary winding of the transformer and the rectifier bridge, the load of the rectifier circuit can have pulsating DC voltage and current in the same direction within the positive and negative half cycles of the AC power supply.

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS Bridge Rectifiers S50VB100 S50VB80 S50VB60 S50VB40 for Electric Tools Hydraulic Lifting Device

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SVB package 50A bridge rectifier S50VB100/S50VB80/S50VB60/S50VB40 suitable for electric tools, hydraulic lifting device solutions


Square bridge silicon bridge stack S25VB100, S35VB100, S50VB100


Large chip S15/S25/S35/S50VB100 50A 1000V welding machine rectifier bridge stack


Application areas: electric welding machine, induction cooker, power supply......


Electric welding machine rectifier bridge, S15/S25/S35/S50VB100, brand new original authentic, 15A/25A/35A/50A 1000V, quality assurance!


Detection method: 

The single-phase bridge rectifier stack is a rectifier assembly packaged together by 4 rectifier diodes in a full-wave rectifier circuit connection mode;

The way to judge the bridge stack is to measure the forward and reverse resistance of 4 diodes with a multimeter;

If the measured forward resistance of the diode is infinite, it means that the internal circuit of the diode is open;

If the measured reverse resistance of the diode is close to zero, it indicates that the diode has broken down;


Output voltage theory: 

1. In the single-phase bridge rectifier circuit, if a filter capacitor is connected, when the load is open, the output voltage (that is, the voltage across the capacitor) is the peak value of the AC input voltage, that is: U output=1.414*U Input, that is, root 2 times the input voltage.

This conclusion is applicable to bridge, full-wave, and half-wave rectifier circuits.

But under load, it is generally designed to be 1.2 times U input. The larger the filter capacitor, the higher the output voltage, and vice versa.


2. In the single-phase bridge rectifier circuit, if there is no filter capacitor, when the load is open, the output voltage is 0.9 times the AC input voltage, that is: U output = 0.9 * U input.

When loaded, the formula remains the same, still: U output = 0.9 * U input. This bridge stack is suitable for circuits within 700V. 5V, 12V, 24V, 36V, 48V, 72V-220V, 380V, are all available!


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 50A 50V-1000V GPP Bridge Rectifiers GBPC50005 GBPC5001 GBPC5002 GBPC5004 GBPC5006 GBPC5008 GBPC5

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

SPS 50A 50V-1000V GPP Bridge Rectifiers GBPC50005 GBPC5001 GBPC5002 GBPC5004 GBPC5006 GBPC5008 GBPC5010 GBPC Package
PDF Download: http://www.spsbridge.com/datasheet/SPS-GBPC50005-THRU-GBPC5010.pdf 

Categories: Discrete Semiconductor Products     
Diodes - Bridge Rectifiers         
Packaging: Bulk     
Part Status: Active     
Diode Type: Single Phase     
Technology: Standard     
Voltage - Peak Reverse (Max): GBPC50005-50V GBPC5001-100V GBPC5002-200V GBPC5004-400V GBPC5006-600V GBPC5008-800V GBPC5010-1000V     
Current - Average Rectified (Io): 50A     
Voltage - Forward (Vf) (Max) @ If: 1.1V @ 25A     
Current - Reverse Leakage @ Vr: 5µA    
Operating Temperature: -55°C ~ 150°C (TJ)     
Mounting Type: QC Terminal     
Package / Case: 4-Square, GBPC

SPS, a diode manufacturer in Chinese semiconductor discrete device industry, the main products include rectifier diode chips, shaft-type silicon rectifier diodes, switching diodes, zener diodes, miniature bridge stacks, single row bridge stacks, surface-mounted glass and surface-mounted plastic-sealed diodes Metal glass packaged high-power rectifiers, etc.

SPS has continuously strengthened cooperation with industry giants, won customers' trust with excellent product quality and service, established a good market brand image, and the number of customers has maintained a steady and steady growth.

Quality policy: "Quality, high efficiency, standard"

Want to know more products, product pictures, parameters, prices, please call us, welcome your call!


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

SPS 50A 50V 100V 200V 1000V GPP Bridge Rectifiers S50VB20 S50VB40 S50VB60 S50VB80 S50VB100 SVB Packa

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

SPS 50A 50V 100V 200V 1000V GPP Bridge Rectifiers S50VB20 S50VB40 S50VB60 S50VB80 S50VB100 SVB Package
PDF Download: http://www.spsbridge.com/datasheet/SPS-S50VB005-THRU-S50VB100.pdf 

Max.Recurrent Peak Reverse Voltage: S50VB005-50V S50VB10-100V S50VB20-200V S50VB40-400V S50VB60-600V S50VB80-800V S50VB100-1000V
Max.Average Forward Rectified Current: 50A

S50VB100 single-phase rectifier square bridge is mainly used in power circuit rectification products, switching power supplies, power adapters, LED light source circuits, chargers, refrigerators and air conditioners, televisions, household appliances and small appliances, and other related products. device.
The original quality of this product guarantees high stability and reliability. Welcome to consult the sampling test.

The rectifier bridge used on the electric welding machine mainly has the following specifications:
S15VB100, S25VB100, S35VB100, S50VB100

What parameters to pay attention to:
1) Strong resistance to surge current and surge voltage;
2) Strong forward flow capacity;
3) The leakage current at room temperature and high temperature should be small;
4) Good heat dissipation and low case temperature;
5) The forward pressure drop is small.
supplement:
1) Brand, choose regular well-known brands;
2) Chip, select GPP glass passivated diode chip;
3) Dimensions: 32 * 32, epoxy shell


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

SPS 50A 50V 1000V OJ Bridge Rectifiers KBPC50005W KBPC5001W KBPC5002W KBPC5004W KBPC5006W KBPC5008W

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

SPS 50A 50V 1000V OJ Bridge Rectifiers KBPC50005W KBPC5001W KBPC5002W KBPC5004W KBPC5006W KBPC5008W KBPC5010W KBPCW Package
PDF Download: http://www.spsbridge.com/datasheet/SPS-KBPC50005W-THRU-KBPC5010W 

Categories: Discrete Semiconductor Products     
Diodes - Bridge Rectifiers         
Packaging: Bulk      
Part Status: Active     
Diode Type: Single Phase     
Technology: Standard     
Voltage - Peak Reverse (Max): KBPC50005W-50V KBPC5001W-100V KBPC5002W-200V KBPC5004W-400V KBPC5006W-600V KBPC5008W-800V KBPC5010W-1kV     
Current - Average Rectified (Io): 50A     
Voltage - Forward (Vf) (Max) @ If: 1.1V @ 7.5A     
Current - Reverse Leakage @ Vr: 10µA @ 1000V     
Operating Temperature: -65°C ~ 150°C (TJ)     
Mounting Type: Through Hole     
Package / Case: 4-Square, KBPC-W     

Bridge rectifier is used to convert AC power to DC power. What is the working principle of the rectifier bridge in the circuit?
Rectification in a rectifier bridge is a term. It accomplishes its work through the one-way conduction principle of the diode. To put it simply, the diode is unidirectional, it is forward conduction and reverse cutoff. That is to say, the diode only allows its positive pole to be positive and negative pole to be negative. The diode only allows current to flow in one direction, so when it is connected to an AC circuit, it can make the current in the circuit flow only in one direction, which is called "rectification". Among them, two diodes are half-wave rectifier bridges, and four are full-wave rectifier bridges.


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

SPS 50A 50V-1000V GPP Bridge Rectifiers KBPC50005W KBPC5002W KBPC5004W KBPC5006W KBPC5008W KBPC5010W

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000


Categories: Discrete Semiconductor Products     
Diodes - Bridge Rectifiers     
Packaging: Bulk    
Part Status: Active     
Diode Type: Single Phase     
Technology: Standard     
Voltage - Peak Reverse (Max): KBPC50005W-50V KBPC5001W-100V KBPC5002W-200V KBPC5004W-400V KBPC5006W-600V KBPC5008W-800V KBPC5010W-1kV     
Current - Average Rectified (Io): 50A     
Voltage - Forward (Vf) (Max) @ If: 1.1V @ 25A     
Current - Reverse Leakage @ Vr: 5µA    
Operating Temperature: -55°C ~ 125°C (TJ)
Storage Temperature: -55°C ~ 150°C      
Mounting Type: Through Hole     
Package / Case: 4-Square, KBPC-W

The bridge rectifier is a rectifier device composed of two or four diodes.
There are three types bridges, half-bridges, full-bridges and three-phase.
There are two types bridges, positive half bridges and negative half.
The text symbol of the bridge is UR.
Basic composition:
The full bridge is composed of four diodes with four pin-outs. The connection point of the anodes of the two diodes is the “positive” of the full-bridge DC output, and the connection point of the anodes of the two diodes is the “negative” of the full-bridge DC output.
The half bridge consists of two diodes and has three lead-out pins. The pins on both sides of the positive half bridge are the anodes of the two diodes, that is, the AC input terminal; the middle pins are the anodes of the two diodes, that is, the "positive electrode" of the DC output terminal. The negative poles of the two diodes on the pins on both sides of the negative half bridge are the AC input terminals; the middle pins are the positive poles of the two diodes, which are the "negative poles" of the DC output terminals. A positive half bridge and a negative half bridge can form a full bridge.

PDF Download: http://www.spsbridge.com/datasheet/SPS-KBPC50005W-THUR-KBPC5010W.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006


SPS 50A 50V-1000V GPP Bridge Rectifiers KBPC50005 KBPC5001 KBPC5002 KBPC5004 KBPC5006 KBPC5008 KBPC

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000


Categories: Discrete Semiconductor Products     
Diodes - Bridge Rectifiers         
Packaging: Bulk      
Part Status: Active     
Diode Type: Single Phase     
Technology: Standard     
Voltage - Peak Reverse (Max): KBPC50005-50V KBPC5001-100V KBPC5002-200V KBPC5004-400V KBPC5006-600V KBPC5008-800V KBPC5010-1kV     
Current - Average Rectified (Io): 50A     
Voltage - Forward (Vf) (Max) @ If: 1.1V @ 25A     
Current - Reverse Leakage @ Vr: 5µA    
Operating Temperature: -55°C ~ 125°C (TJ)
Storage Temperature: -55°C ~ 150°C      
Mounting Type: QC Terminal     
Package / Case: 4-Square, KBPC

Generally, there are 3 numbers in the name of the rectifier bridge, the first number represents the rated current, A; the last two numbers represent the amount of voltage (number * 100), V
For example: KBL407 is 4A, 700V
KBPC5010 is 50A, 1000V (005, 01, 02, 04, 06, 08, 10 respectively represent 50V, 100V, 200V, 400V, 600V, 800V, 1000V of the voltage file).

There are four types of rectifier bridge packages: square bridge, flat bridge, round bridge, and patch MINI bridge;
Square bridges are mainly packaged BR3, BR6, BR8, GBPC, KBPC, KBPC-W, GBPC-W, MT-35 (three-phase bridge);
Flat bridges are mainly packaged KBP, KBL, KBU, KBJ, GBU, GBJ, D3K;
Circular bridges are mainly packaged WOB, WOM, RB-1;
The main package of the chip MINI bridge BDS, MBS, MBF, ABS

PDF Download: http://www.spsbridge.com/datasheet/SPS-KBPC50005-THUR-KBPC5010.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006


分页:[«]1[2][»]