SPS 25A 1000V Glass Passivated Single Phase Bridge Rectifier Through Hole GBJ2510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.

SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


GBJ25005 - GBJ2510 25A GLASS PASSIVATED BRIDGE RECTIFIER

GBJ25005, GBJ2501, GBJ2502, GBJ2504, GBJ2506, GBJ2508, GBJ2510


Glass Passivated Die Construction

High Case Dielectric Strength of 2500VRMS

Low Reverse Leakage Current

Surge Overload Rating to 350A Peak

Ideal for Printed Circuit Board Applications

UL Listed Under Recognized Component Index

Lead Free Finish; RoHS Compliant 


Case: GBJ

Case Material: Molded Plastic. UL Flammability Classification 94V-0

Moisture Sensitivity: Level 1 per J-STD-020

Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208

Lead Free Plating (Tin Finish).

Polarity: Molded on Body

Mounting: Through Hole for #6 Screw

Mounting Torque: 5.0 in-lbs Maximum

Weight: 6.6 grams (Approximate)


GBJ bridge rectifier needs special attention in installation and work, because the correct installation and correct use of GBJ bridge rectifier determine the service life of GBJ bridge rectifier.


The distance between the lower edge of the GBJ bridge rectifier and the surface of the commutator or collector ring should be kept within 2-4 mm. If the distance is too small, GBJ will easily scratch the commutator or bridge; if it is too large. The GBJ bridge rectifier is easy to move and cause damage. Ensure that the GBJ bridge rectifier works within the surface of the commutator or GBJ, and not close to the edge of the GBJ. If the GBJ bridge rectifier is improperly installed in the cold state, the GBJ bridge rectifier may not completely touch the surface of the collector ring after the GBJ shaft expands in the hot state. Grind the arc surface of the GBJ bridge rectifier to make it basically consistent with the GBJ sub or bridge rectifier.


Due to the gap between the GBJ and the bridge rectifier, and due to the slight deformation of the fixed parts of the GBJ bridge rectifier under the action of stress, the radius of curvature of the GBJ bridge rectifier section will be slightly larger than that of the commutator or the GBJ bridge rectifier. During the operation of the bridge rectifier, not all the cross-sectional area of the GBJ bridge rectifier is in contact with the commutator or the collector ring, but only a part of the area. Therefore, the arc surface of the GBJ bridge rectifier must be ground to make it basically consistent with the commutator or GBJ bridge rectifier ring.

SPS-25A-1000V-Glass-Passivated-Single-Phase-Bridge-Rectifier-Through-Hole-GBJ2510

Contact:Mr. Jerry Xu

Email: jerry@sps-elec.com

Website: https://www.spssemi.com/ 

Add:10F, Flat34, Caohejing Hi-tech park, No.258 Xinzhuan Road, Songjiang District, Shanghai

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 25A Glass Passivated Bridge Rectifiers Through Hole GBJ25005-GBJ2510

Special Sun A·H·M Technology(Shanghai)Co.,Ltd.
SPS - ISO Factory for SMD and Through-hole Diodes and Rectifiers Since 2000


SPS 25A Glass Passivated Bridge Rectifiers Through Hole GBJ25005-GBJ2510


Features

• Glass Passivated Die Construction

• High Case Dielectric Strength of 2500VRMS

• Low Reverse Leakage Current

• Surge Overload Rating to 350A Peak

• Ideal for Printed Circuit Board Applications

• RoHS Compliant


Mechanical Data

• Case: GBJ

• Case Material: Molded Plastic

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Plated Leads

• Polarity: Molded on Body

• Mounting: Through Hole for #6 Screw

• Marking: Type Number

• Weight: 6.6 grams (approximate) 


Characteristic Symbol 

• GBJ25005: 50V 

• GBJ2501: 100V 

• GBJ2502: 200V 

• GBJ2504: 400V 

• GBJ2506: 600V 

• GBJ2508: 800V 

• GBJ2510: 1000V


GBJ2510 is used widely in induction cooker, the role of GBJ2510 is to rectify, only change the polarity direction of its current, and will not change its current magnitude.


The internal structure of the bridge rectifier of the induction cooker and the bridge rectifier of the power amplifier is the same, consisting of 4 diode rectifiers. The difference is that withstand voltage and rectified current are different. The bridge rectifier of the induction cooker is to rectify the household AC220V voltage, its withstand voltage value is generally above 1000V, and the current is above 20A.


The withstand voltage of the bridge rectifier of the power amplifier is generally below 100V, and the rectified current is about 10A. Why is the withstand voltage value and rectified current of the power amplifier bridge rectifier relatively small, because the bridge rectifier of the power amplifier rectifies the voltage output by the power amplifier transformer, after passing through the transformer, its output voltage is below 100V, mostly 22-35V.

Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

SPS 25A 200V-1000V GPP Bridge Rectifiers S25VB20 S25VB40 S25VB60 S25VB80 S25VB100 SVB Package

SPS 25A 200V-1000V GPP Bridge Rectifiers S25VB20 S25VB40 S25VB60 S25VB80 S25VB100 SVB Package    
FEATURES:
Rating to 1000V PRV

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

SPS 25A 200V-1000V GPP Bridge Rectifiers S25VB20 S25VB40 S25VB60 S25VB80 S25VB100 SVB Package    
FEATURES:
Rating to 1000V PRV

High efficiency
Glass passivated chip junction
Electrically isolated metal case for maximum heat dissipation
The plastic material has UL flammability classification 94V-0
MECHANICAL DATA:
Case : Molded plastic with Heatsink internally mounted in the bridge encapsulation
Polarity : As marked on Body
Mounting : Hole for # 10 screw
Voltage - Peak Reverse (Max): S25VB005-50V S25VB10-100V S25VB20-200V S25VB40-400V S25VB60-600V S25VB80-800V S25VB100-1000V    
Current - Average Rectified (Io): 25A     
Voltage - Forward (Vf) (Max) @ If: 1.05V @ 12.5A     
Current - Reverse Leakage @ Vr: 5μA     
Operating Temperature: -55°C ~ 150°C (TJ)     
Mounting Type: Through Hole     
Package / Case: S35

Q: Can the commonly used bridge rectifiers S25VB100 be replaced by KBPC5010?
A: Yes.
S25VB100 is 25A 1000V nominal.
KBPC5010 is 50A 1000V nominal.
From the perspective of product structure and technology, the actual performance of S25VB may be slightly stronger than KBPC50, and the price of S25 is higher.
The rectifier bridge is marked with rated current and voltage values. The input voltage cannot be higher than this value, and the load current cannot be greater than this value.
The rectifier bridge encloses the rectifier tube in a shell. Divided into full bridge and half bridge. The full bridge is to seal the four diodes of the connected bridge rectifier circuit together. The half bridge is to seal two halves of two diode bridge rectifiers together. Two bridges can be used to form a bridge rectifier circuit. One half bridge can also form a full-wave rectifier circuit with a center tap on the transformer. Rectifier circuit and operating voltage

PDF Download: http://www.spsbridge.com/datasheet/SPS-S25VB20-THRU-S25VB100.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

SPS 25A 50V-1000V GPP Bridge Rectifiers KBPC25005W KBPC2501W KBPC2502W KBPC2504W KBPC2506W KBPC2508W

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

Categories: Discrete Semiconductor Products     
Diodes - Bridge Rectifiers         
Packaging: Bulk      
Part Status: Active     
Diode Type: Single Phase     
Technology: Standard     
Voltage - Peak Reverse (Max): KBPC25005W-50V KBPC2501W-100V KBPC2502W-200V KBPC2504W-400V KBPC2506W-600V KBPC2508W-800V KBPC2510W-1kV     
Current - Average Rectified (Io): 25A     
Voltage - Forward (Vf) (Max) @ If: 1.1V @ 12.5A     
Current - Reverse Leakage @ Vr: 5µA    
Operating Temperature: -55°C ~ 150°C (TJ)
Storage temperature range: -55°C ~ 150°C     
Mounting Type: Through Hole     
Package / Case: 4-Square, KBPC-W     

FEATURES
High forward  
surge current capability
Low thermal resistance.
High isolation voltage from case to lugs.
High temperature soldering guaranteed:     260/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
Case: Matel case.
Terminal: Plated 0.25" (6.35mm) lug.
Polarity: Polarity symbols marked on case.
Mounting: Thru hole for #8 screw, 20 in,- lbs. Torque Max.
Weight:1.02 ounce, 29gram

PDF Download: http://www.spsbridge.com/datasheet/SPS-KBPC25005W-THUR-KBPC2510W.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

SPS 25A 50V-1000V GPP Bridge Rectifiers KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506 KBPC2508 KBPC2

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

Categories: Discrete Semiconductor Products     
Diodes - Bridge Rectifiers         
Packaging: Bulk      
Part Status: Active     
Diode Type: Single Phase     
Technology: Standard     
Voltage - Peak Reverse (Max): KBPC25005-50V KBPC2501-100V KBPC2502-200V KBPC2504-400V KBPC2506-600V KBPC2508-800V KBPC2510-1kV     
Current - Average Rectified (Io): 25A     
Voltage - Forward (Vf) (Max) @ If: 1V @ 5A     
Current - Reverse Leakage @ Vr: 5µA @    
Operating Temperature: -55°C ~ 125°C (TJ)
Storage temperature range: -55°C ~ 150°C
Mounting Type: QC Terminal     
Package / Case: 4-Square, KBPC     

FEATURES
Rating to 1000V PRV
Surge overload rating to 240 Amperes peak
Ideal for printed circuit board
Reliable low cost construction utilizing molded        
plastic technique results in inexpensive product
Lead solderable per MIL-STD-202 method 208
Mounting: thru hole for # 10 screw Mounting

KBPC2510 is a single-phase rectifier bridge.
The mark + is the rectified output DC positive pole, and the diagonal is DC negative pole.
Mark AC or ~ and diagonal for AC input

KBPC2510 is a metal case. The polarity is indicated by the polarity symbol.
Epoxy: UL94V-O rate flame retardant
Polarity: Polarity symbol indicates the case

PDF Download: http://www.spsbridge.com/datasheet/SPS-KBPC25005-THUR-KBPC2510.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006

SPS 25A 50V-1000V GPP Bridge Rectifiers GBPC25005 GBPC2502 GBPC2504 GBPC2506 GBPC2508 GBPC2510

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000

SPS 25A 50V-1000V GPP Bridge Rectifiers GBPC25005 GBPC2501 GBPC2502 GBPC2504 GBPC2506 GBPC2508 GBPC2510 GBPC Package
Categories: Discrete Semiconductor Products Diodes - Bridge Rectifiers
Packaging:Bulk
Part Status: Active
Diode Type:Single Phase
Technology:Standard
Voltage - Peak Reverse (Max):GBPC25005-50V, GBPC2501-100V, GBPC2502-200V, GBPC2504-400V, GBPC2506-600V, GBPC2508-800V, GBPC2510-1kV
Current - Average Rectified (Io) : 25A
Voltage - Forward (Vf) (Max) @ If1V @ : 1.1V @ 12.5A
Operating Temperature: -55°C ~ 150°C
Mounting Type: Through Hole
Package / Case: GBPC
Environmental & Export Classifications: RoHS compliant
FEATURES   
Rating to 1000V PRV
High efficiency
Glass passivated chip junction
Electrically isolated metal case for maximum heat dissipation
The plastic material has UL flammability classification 94V-0
Electrically isolated base-2500 Vlots

PDF Download: http://www.spsbridge.com/datasheet/SPS-GBPC25005-THUR-GBPC2510.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006


SPS 25A 50V-1000V GPP Bridge Rectifiers GBJ25005 GBJ2501 GBJ2502 GBJ2504 GBJ2506 GBJ2508 GBJ2510 GBJ

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000


SPS 25A 50V-1000V GPP Bridge Rectifiers GBJ25005 GBJ2501 GBJ2502 GBJ2504 GBJ2506 GBJ2508 GBJ2510 GBJ Package

Categories: Discrete Semiconductor Products Diodes - Bridge Rectifiers

Packaging:Bulk

Part Status: Active

Diode Type:Single Phase

Technology:Standard

Voltage - Peak Reverse (Max):GBJ25005-50V, GBJ2501-100V, GBJ2502-200V, GBJ2504-400V, GBJ2506-600V, GBJ2508-800V, GBJ2510-1kV

Current - Average Rectified (Io) : 25A

Voltage - Forward (Vf) (Max) @ If1V @ : 1.0V @ 12.5A

Operating Temperature: -55°C ~ 150°C 

Mounting Type: Through Hole

Package / Case: 4-SIP, GBJ

Environmental & Export Classifications: RoHS compliant 


PDF Download: http://www.spsbridge.com/datasheet/SPS-GBJ25005-THUR-GBJ2510.pdf


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006


SPS 25A 50V-1000V GPP Bridge Rectifiers GBPC25005W GBPC2501W GBPC2502W GBPC2504W GBPC2506W GBPC2508W

Special Sun A•H•M Technology(Shanghai)Co.,Ltd.

SPS – Bridge Rectifier Manufacturer Since 2000


SPS' production base has a bridge rectifier division and a microelectronics division. The main products are 0.5A-50A bridge rectifiers (MINIDIP, DB, WOM, KBP, GBP, GBL, S25VB, TO-220, KBL, KBU, GBU, GBJ, KBPC, GBPC, etc.), ordinary diode rectifier , fast recovery diode rectifier, high efficiency dioderectifier, ultra fast recovery diode rectifier, Schottky diode rectifier, transient suppression diode, power regulator diode, discharge tube and SOT / SOD small package transistor, rectifier module and so on.


With the joint efforts of all company colleagues, SPS has developed rapidly in recent years, and have successively passed 1SO9001: 2008 quality management system certification, US UL safety certification (UL number E302263) and EU ROHS certification. SPS products are widely used in home appliances, switching power supplies, green lighting, IT, instrumentation, automotive electronics, industrial control, generators, welding machines, inverters and other fields. Processing business can provide customers with large-scale, full-series, multi-variety, and specialized package solutions.


SPS 25A 50V-1000V GPP Bridge Rectifiers GBPC25005W GBPC2501W GBPC2502W GBPC2504W GBPC2506W GBPC2508W GBPC2510W GBPC-W Package 

Categories: Discrete Semiconductor Products

Diodes - Bridge Rectifiers

Packaging: Bulk 

Part Status: Active

Diode Type: Single Phase

Technology: Standard

Voltage - Peak Reverse (Max): GBPC25005W-50V, GBPC2501W-100V, GBPC2502W-200V, GBPC2504W-400V, GBPC2506W-600V, GBPC2508W-800V, GBPC2510W-1000V

Current - Average Rectified (Io): 25A

Voltage - Forward (Vf) (Max) @ If: 1.1V 

Current - Reverse Leakage @ Vr: 5µA 

Operating Temperature: -55°C ~ 150°C (TJ)

Mounting Type: Through Hole

Package / Case: 4-Square, GBPC-W

PDF Download: http://www.spsbridge.com/datasheet/SPS-GBPC25005W-THRU-GBPC2510W.pdf 


SPS strongest bridge rectifiers:

1000V: GBU410, GBU610, GBU810, GBU1010, GBJ1010, GBJ2510, GBJ5010, GBPC3510, GBPC5010, KBPC3510, KBPC5010, BR3510, BR5010

600V: GBU406, GBU606, GBU806, GBU0606, GBJ0606, GBJ2506, GBJ5006, GBPC3506, GBPC5006, KBPC3506, KBPC5006, BR3506, BR5006


Check the best offer with SPS, a professional factory of diode rectifiers, bridge rectifiers, transistors etc.

分页:[«]1[»]